Embedded polymerization driven asymmetric PEM for direct methanol fuel cells

This work reports the fabrication of proton exchange membranes (PEM) with stronger resistance to methanol penetration than Nafion^®117. A three-component acrylic polymer blend (TCPB) consisting of a copolymer of 4-vinylphenol-methyl methacrylate, poly(butyl methacrylate) (PBMA) and a copolymer of methyl methacrylate-ethyl acrylate is used as the methanol barrier. In order to implant a proton source phase within the membrane as homogeneously as possible, the hydrophilic monomers, 2-acrylamido-2-methyl propanesulfonic acid (AMPS), 2-hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol) dimethylacrylate (PEGDMA), are polymerized only after they have been embedded in the TCPB matrix. The embedded polymerization has resulted in an asymmetric membrane structure, in which the hydrophilic network is sandwiched by two layers of matrixes with high percentages of TCPB. As expected, this asymmetric membrane structure exhibits lower methanol uptake than Nafion^®117; and a proton conductivity in the range of 10⁻³–10⁻⁴ S/cm, which is dependent on the concentration of the sulfonic acid content. It is suggested that the two external layers in this asymmetric membrane provide primarily methanol-blocking and supporting proton-conducting properties; while the middle layer supplies protons and conserves water. This unique sandwiched PEM structure from embedded polymerization is confirmed by microstructure characterizations and by physical property measurements.     

Improving the quality of 3D-QSAR by using flexible-ligand receptor models

To address the problems associated with molecular conformations and alignments in the 3D-QSAR studies, we have developed the Flexible Ligand - Atomic Receptor Model (FLARM) 2.0 method. The FLARM 2.0 method has three unique features as compared to other pseudoreceptor model methods: (1) the training ligands are flexibly optimized inside the receptors to achieve minimal docking energies; (2) the receptor atoms are spatially moveable in the process of genetic evolving in order to avoid improper initial receptor shapes; and (3) void receptor sites are specially favored in order to obtain open receptor models that allow large gaps. Advantages of an open model include less noise information, a smaller risk of overfitting, and ease of locating the key interaction sites. The latter two features, inherited from the previous FLARM 1.0 method, can improve the predictive ability of the 3D-QSAR models, while the first feature is newly implemented to relieve the uncertainty caused by improper conformation and alignment. Three FLARM 2.0 case studies were performed, and the results show that FLARM 2.0 models are highly predictive and robust. FLARM 2.0 pseudoreceptor models can correspond well with the pharmacophore models and/or the binding sites of the real protein receptors.     

Application of Headspace Liquid-Phase Microextraction to the Analysis of Volatile Halocarbons in Water

The determination of four volatile halocarbons (CHCl₃, CCl₄, C₂HCl₃ and C₂Cl₄) in water by headspace liquid-phase microextraction (HS-LPME) with gas chromatography using a micro electron capture detector (GC-μECD) is described. The effects of the type and volume of the extraction solvent, headspace volume, stirring rate, extraction temperature and time and ionic strength on the extraction performance are investigated and optimized. The developed protocol yields a linear calibration curve in the concentration range from 0.05 to 50 µg L^?1 for the target analytes; the detection limits ranged from 0.003 to 0.146 µg L^?1 and the relative standard deviation (R.S.D.) values below 8.45%. The results demonstrate that HS-LPME followed with GC-μECD is a simple and reliable technique for the determination of volatile halocarbons in water samples.     

硼氢化钠水解制氢的研究

采用置换镀的方法在泡沫镍基体上获得不同载钌量的NaBH4水解制氢催化剂。实验结果表明，NaBH4水解制氢反应为零级反应，氢气生成速率随载钌量的增加而变快；当泡沫镍表面完全被钌覆盖时，载钌量为6%，相应的催化能力最强。与离子交换树脂载钌催化剂相比，泡沫镍载钌催化剂更稳定、耐用。实验还证实，30%比35%的NaBH4水溶液在相同的催化剂作用下更易发生水解反应；NaBH4水溶液中加入少量的NaOH有助于提高钌催化剂的催化性能。通过对NaBH4储氢体系的能量计算，说明采用该氢源体系的微型燃料电池的能量密度有望达到甚至超过锂离子电池的比能量水平。     

Study on the Thermodynamic Stabilities of Te-Substituted Di-n-butyltellurium Ylide

SincethediscoveryofphosphoniumylidebyWittig',carbanionsstabilizedbyadjacentfifthorsixthgrouponiumionshavebeendevelopedasavaluablereactiveintermediate.However,despitethegreateffortsinylidechemistryinthepastfewdecades',relativelylittleisknownaboutthethermodynamicstabilitiesofylidecarbanions.Itiswellknowthatthequantitativemeasuresofthecarbanionstabilityhavecontributedagreatdealtothedevelopmentoforganicchemistry,thereforeitshouldbeexpectedthattheknowledgeaboutylidestabilitywillalsoprovidavaluableg…     

Contractions with a unilateral shift summand are reflexive

If T is a contraction on the Hilbert space H and there is an invariant subspace K for T such that T/K is similar to a backward shift, then T is reflexive. If similarity is replaced by quasi-similarity, then the same conclusion holds under the additional condition that the defect index of T be finite.This research was partially supported by National Science Council (Republic of China).     

Filtered backprojection for the reconstruction of a high-resolution (4,2)D CH3-NH NOESY spectrum on a 29 kDa protein

Projection-reconstruction (PR) NMR enables rapid collection of multidimensional NMR data. NOESY represents a particularly difficult challenge for currently existing reconstruction algorithms, as it requires the quantitative reconstruction of an unknown number of peaks, at full sensitivity. We have demonstrated the successful application of PR-NMR to NOESY by determining the 4D methyl/amide NOESY spectrum of a 29 kDa protein, human carbonic anhydrase II, from 2D projections, using filtered backprojection for reconstruction. Compared with a 3D control spectrum, all expected peaks were faithfully reconstructed, with correct volumes and with no artifacts. Filtered backprojection thus provides a way to obtain high-resolution 4D NOESY data in the time required for conventional 3D data collection.     

两种胶原纤维固化单宁对La3+的吸附特性研究

以皮胶原纤维为基质,通过交联剂分别将黑荆树单宁和杨梅单宁固化在胶原纤维上制备吸附材料。实验表明,这两种吸附材料对稀土金属离子La^3＋有很好的吸附作用。在pH为4.5的条件下,当吸附剂用量为0.1 g,La^3＋初始浓度为9.952 mmol·L^-1,固化杨梅单宁的平衡吸附量为0.388 mmol·g^-1,比固化黑荆树单宁略大,其吸附平衡均符合Freundlich方程。进一步研究了固化杨梅单宁的吸附动力学、温度、pH值等对吸附平衡的影响。结果表明,温度对吸附平衡的影响不明显;pH值对吸附平衡有较大影响,在适当范围内提高pH值会增加平衡吸附量;吸附动力学可用拟二级速度方程来描述。当吸附温度为293 K时,由拟二级速率方程计算所得的平衡吸附量与实测的平衡吸附量误差在3%以内。同时固化杨梅单宁也具有良好的柱动力学特性。     

Probing the Effects of Reagent Gas Pressure and Ion Source Temperature for Dimethyl Ether Chemical Ionization of Tricyclic Antidepressants in an External Source Ion Trap Mass Spectrometer

This study examines the reagent gas pressure and ion source temperature dependence for dimethyl ether chemical ionization (DME CI) mass spectra recorded with an external source ion trap mass spectrometer (ITMS). Information for better controls of the reagent gas pressure in order to obtain fair CI spectra is provided. The origin of M^+? ions observed in DME CIMS is discussed in detail. Furthermore, the ion source temperature effect on the DME CI is also investigated.     

Preparation and Properties of Urease Immobilized onto Glutaraldehyde Cross-linked Chitosan Beads

Urease was immobilized onto the glutaraldehyde cross-linked chitosan beads that were prepared under microwave irradiation. The activity and the yield of activity of immobilized urease was 10.83 U/g B and 47.7%, respectively. The conditions of urease immobilization were optimized. The properties of the immobilized urease were investigated and compared with that of the free enzyme.